Micro-terrazzo floor system
The look of terrazzo, poured in a single layer.
A self-leveling decorative epoxy floor that combines a fine Terrazzino aggregate blend with a two-component, 100% solids clear epoxy binder to achieve the look of terrazzo in one application.
The collection
Eight blends
Each blend pairs with a matched base coat for depth and consistency.
60 mils (target)
Decorative layer thickness
Source: Owner decision (Oct 30, 2026) · retrieved 2026-10-30
< 2 g/L
VOC content
Source: Terrazzino Specification sheet (snapshot; revision/date not stated) · retrieved 2026-10-30
Find your path
Built for every seat at the table
Architects & designers
Specification data, system detail, and color blends for design development.
Learn more →Installers & contractors
Layer-by-layer build-up, application conditions, and cure schedule.
Learn more →Owners & facility managers
What the floor needs day to day, and how to keep it performing.
Learn more →The system
One floor, five layers
From prepared substrate to finish coat, every layer has a job.
- 5
Terrazzino Topcoat or Cera finish2–3 mils
2–3 mils urethane (planning)
[NEEDS DATA: confirm] - 4
Terrazzino micro-terrazzo60 mils
60 mils (target)
- 3
Terrazzino High Build Epoxy20 mils
20 mils (planning)
[NEEDS DATA: confirm] - 2
Terrazzino Moisture Vapor Control20 mils
20 mils (planning)
Alt: Over eligible non-porous surfaces only: Terrazzino Fast Set Primer (300 sq ft/gal planning). The primer is not a moisture barrier. (mils: Data pending)
[NEEDS DATA: confirm] - 1
Prepared concrete substrate
1. Prepared concrete substrate
2. Terrazzino Moisture Vapor Control20 mils
20 mils (planning)
Alt: Over eligible non-porous surfaces only: Terrazzino Fast Set Primer (300 sq ft/gal planning). The primer is not a moisture barrier. (mils: Data pending)
[NEEDS DATA: confirm]3. Terrazzino High Build Epoxy20 mils
20 mils (planning)
[NEEDS DATA: confirm]4. Terrazzino micro-terrazzo60 mils
60 mils (target)
5. Terrazzino Topcoat or Cera finish2–3 mils
2–3 mils urethane (planning)
[NEEDS DATA: confirm]
- Prepared concrete substrate — Diamond ground flat and clean; cracks and holes opened, filled slightly high and ground flush.
- Terrazzino Moisture Vapor Control — Moisture vapor barrier. Required on all slab-on-grade work and any application directly over concrete. Thickness: 20 mils (planning). Alternative: Over eligible non-porous surfaces only: Terrazzino Fast Set Primer (300 sq ft/gal planning). The primer is not a moisture barrier.
- Terrazzino High Build Epoxy — 100% solids pigmented epoxy matched to the blend; sets the background tone and seals pinholes. Thickness: 20 mils (planning).
- Terrazzino micro-terrazzo — Self-leveling clear epoxy binder with Terrazzino aggregate, spread at 60 mils with a 50–60 mil notched squeegee or wire gauge rake, then loop-rolled. Thickness: 60 mils (target).
- Terrazzino Topcoat or Cera finish — Urethane topcoat for wear, chemical and UV protection — or Terrazzino Cera polymer finish for maintained floors. Thickness: 2–3 mils urethane (planning).
Source: Terrazzino product page and owner planning values — see per-layer notes.
≈ 102–103 mils total (planning) — MVB, base coat, Terrazzino layer and urethane topcoat
[NEEDS DATA: confirm layer thicknesses]Performance at a glance
Built to perform, not just to look right
Compressive strength
10,500 psi
Tensile strength
6,300 psi
Hardness
Shore D 82 (typical)
Gloss
> 70 at 60°
Where it works
Specified across a range of interiors
- Retail
- Cafeterias
- Offices & lobbies
- Locker rooms
- Hotels
- Apartment buildings
- Garages
- Townhouses
- Restaurants
Ready to see it in person?
Request a physical sample before specifying — screens vary, Terrazzino shouldn't.
Request a sample